101 research outputs found
Physical Conditions and Variability Processes in AGN Jets through Multi-Frequency Linear and Circular Radio Polarization Monitoring
Radio polarimetry is an invaluable tool to investigate the physical
conditions and variability processes in active galactic nuclei (AGN) jets.
However, detecting their linear and circular polarization properties is a
challenging endeavor due to their low levels and possible depolarization
effects. We have developed an end-to-end data analysis methodology to recover
the polarization properties of unresolved sources with high accuracy. It has
been applied to recover the linear and circular polarization of 87 AGNs
measured by the F-GAMMA program from July 2010 to January 2015 with a mean
cadence of 1.3 months. Their linear polarization was recovered at four
frequencies between 2.64 and 10.45 GHz and the circular polarization at 4.85
and 8.35 GHz. The physical conditions required to reproduce the observed
polarization properties and the processes which induce their variability were
investigated with a full-Stokes radiative transfer code which emulates the
synchrotron emission of modeled jets. The model was used to investigate the
conditions needed to reproduce the observed polarization behavior for the
blazar 3C 454.3, assuming that the observed variability is attributed to
evolving internal shocks propagating downstream.Comment: 6 pages, 2 figure
Pictures in Your Mind: Using Interactive Gesture-Controlled Reliefs to Explore Art
Tactile reliefs offer many benefits over the more classic raised line drawings or tactile diagrams, as depth, 3D shape, and surface textures are directly perceivable. Although often created for blind and visually impaired (BVI) people, a wider range of people may benefit from such multimodal material. However, some reliefs are still difficult to understand without proper guidance or accompanying verbal descriptions, hindering autonomous exploration.
In this work, we present a gesture-controlled interactive audio guide (IAG) based on recent low-cost depth cameras that can be operated directly with the hands on relief surfaces during tactile exploration. The interactively explorable, location-dependent verbal and captioned descriptions promise rapid tactile accessibility to 2.5D spatial information in a home or education setting, to online resources, or as a kiosk installation at public places.
We present a working prototype, discuss design decisions, and present the results of two evaluation studies: the first with 13 BVI test users and the second follow-up study with 14 test users across a wide range of people with differences and difficulties associated with perception, memory, cognition, and communication. The participant-led research method of this latter study prompted new, significant and innovative developments
Experimental proof of Joule heating-induced switched-back regions in OLEDs
Organic light-emitting diodes (OLEDs) have become a major pixel technology in the display sector, with products spanning the entire range of current panel sizes. The ability to freely scale the active area to large and random surfaces paired with flexible substrates provides additional application scenarios for OLEDs in the general lighting, automotive, and signage sectors. These applications require higher brightness and, thus, current density operation compared to the specifications needed for general displays. As extended transparent electrodes pose a significant ohmic resistance, OLEDs suffering from Joule self-heating exhibit spatial inhomogeneities in electrical potential, current density, and hence luminance. In this article, we provide experimental proof of the theoretical prediction that OLEDs will display regions of decreasing luminance with increasing driving current. With a two-dimensional OLED model, we can conclude that these regions are switched back locally in voltage as well as current due to insufficient lateral thermal coupling. Experimentally, we demonstrate this effect in lab-scale devices and derive that it becomes more severe with increasing pixel size, which implies its significance for large-area, high-brightness use cases of OLEDs. Equally, these non-linear switching effects cannot be ignored with respect to the long-term operation and stability of OLEDs; in particular, they might be important for the understanding of sudden-death scenarios
Recommended from our members
Electrothermal Tristability Causes Sudden Burn-In Phenomena in Organic LEDs
Organic light-emitting diodes (OLEDs) have been established as a mature display pixel technology. While introducing the same technology in a large-area form factor to general lighting and signage applications, some key questions remain unanswered. Under high-brightness conditions, OLED panels were reported to exhibit nonlinear electrothermal behavior causing lateral brightness inhomogeneities and even regions of switched-back luminance. Also, the physical understanding of sudden device failure and burn-ins is still rudimentary. A safe and stable operation of lighting tiles, therefore, requires an in-depth understanding of these physical phenomena. Here, it is shown that the electrothermal treatment of thin-film devices allows grasping the underlying physics. Configurations of OLEDs with different lateral dimensions are studied as a role model and it is reported that devices exceeding a certain panel size develop three stable, self heating-induced operating branches. Switching between them causes the sudden formation of dark spots in devices without any preexisting inhomogeneities. A current-stabilized operation mode is commonly used in the lighting industry, as it ensures degradation-induced voltage adjustments. Here, it is demonstrated that a tristable operation always leads to destructive switching, independent of applying constant currents or voltages. With this new understanding of the effects at high operation brightness, it will be possible to adjust driving schemes accordingly, design more resilient system integrations, and develop additional failure mitigation strategies. © 2021 The Authors. Advanced Functional Materials published by Wiley-VCH Gmb
Blazars in the Fermi Era: The OVRO 40-m Telescope Monitoring Program
The Large Area Telescope (LAT) aboard the Fermi Gamma-ray Space Telescope
provides an unprecedented opportunity to study gamma-ray blazars. To capitalize
on this opportunity, beginning in late 2007, about a year before the start of
LAT science operations, we began a large-scale, fast-cadence 15 GHz radio
monitoring program with the 40-m telescope at the Owens Valley Radio
Observatory (OVRO). This program began with the 1158 northern (declination>-20
deg) sources from the Candidate Gamma-ray Blazar Survey (CGRaBS) and now
encompasses over 1500 sources, each observed twice per week with a ~4 mJy
(minimum) and 3% (typical) uncertainty. Here, we describe this monitoring
program and our methods, and present radio light curves from the first two
years (2008 and 2009). As a first application, we combine these data with a
novel measure of light curve variability amplitude, the intrinsic modulation
index, through a likelihood analysis to examine the variability properties of
subpopulations of our sample. We demonstrate that, with high significance
(7-sigma), gamma-ray-loud blazars detected by the LAT during its first 11
months of operation vary with about a factor of two greater amplitude than do
the gamma-ray-quiet blazars in our sample. We also find a significant (3-sigma)
difference between variability amplitude in BL Lacertae objects and
flat-spectrum radio quasars (FSRQs), with the former exhibiting larger
variability amplitudes. Finally, low-redshift (z<1) FSRQs are found to vary
more strongly than high-redshift FSRQs, with 3-sigma significance. These
findings represent an important step toward understanding why some blazars emit
gamma-rays while others, with apparently similar properties, remain silent.Comment: 23 pages, 24 figures. Submitted to ApJ
Radio observations of the first three-month Fermi-AGN at 4.8 GHz
Using the Urumqi 25m radio telescope, sources from the first three-month
Fermi-LAT detected AGN catalog with declination >0 were observed in 2009 at 4.8
GHz. The radio flux density appears to correlate with the gamma-ray intensity.
Intra-day variability (IDV) observations were performed in March, April and May
in 2009 for selected 42 gamma-ray bright blazars, and 60% of them show evident
flux variability at 4.8 GHz during the IDV observations, the IDV detection rate
is higher than that in previous flat-spectrum AGN samples. The IDV appears more
often in the VLBI-core dominant blazars, and the non-IDV blazars show
relatively `steeper' spectral indices than the IDV blazars. Pronounced
inter-month variability has been found in two BL Lac objects: J0112+2244 and
J0238+1636.Comment: 10 pages, 3 figures, accepted for publication in RA
Update on the Combined Analysis of Muon Measurements from Nine Air Shower Experiments
Over the last two decades, various experiments have measured muon densities in extensive air showers over several orders of magnitude in primary energy. While some experiments observed differences in the muon densities between simulated and experimentally measured air showers, others reported no discrepancies. We will present an update of the meta-analysis of muon measurements from nine air shower experiments, covering shower energies between a few PeV and tens of EeV and muon threshold energies from a few 100 MeV to about 10GeV. In order to compare measurements from different experiments, their energy scale was cross-calibrated and the experimental data has been compared using a universal reference scale based on air shower simulations. Above 10 PeV, we find a muon excess with respect to simulations for all hadronic interaction models, which is increasing with shower energy. For EPOS-LHC and QGSJet-II.04 the significance of the slope of the increase is analyzed in detail under different assumptions of the individual experimental uncertainties
31st Annual Meeting and Associated Programs of the Society for Immunotherapy of Cancer (SITC 2016) : part two
Background
The immunological escape of tumors represents one of the main ob- stacles to the treatment of malignancies. The blockade of PD-1 or CTLA-4 receptors represented a milestone in the history of immunotherapy. However, immune checkpoint inhibitors seem to be effective in specific cohorts of patients. It has been proposed that their efficacy relies on the presence of an immunological response. Thus, we hypothesized that disruption of the PD-L1/PD-1 axis would synergize with our oncolytic vaccine platform PeptiCRAd.
Methods
We used murine B16OVA in vivo tumor models and flow cytometry analysis to investigate the immunological background.
Results
First, we found that high-burden B16OVA tumors were refractory to combination immunotherapy. However, with a more aggressive schedule, tumors with a lower burden were more susceptible to the combination of PeptiCRAd and PD-L1 blockade. The therapy signifi- cantly increased the median survival of mice (Fig. 7). Interestingly, the reduced growth of contralaterally injected B16F10 cells sug- gested the presence of a long lasting immunological memory also against non-targeted antigens. Concerning the functional state of tumor infiltrating lymphocytes (TILs), we found that all the immune therapies would enhance the percentage of activated (PD-1pos TIM- 3neg) T lymphocytes and reduce the amount of exhausted (PD-1pos TIM-3pos) cells compared to placebo. As expected, we found that PeptiCRAd monotherapy could increase the number of antigen spe- cific CD8+ T cells compared to other treatments. However, only the combination with PD-L1 blockade could significantly increase the ra- tio between activated and exhausted pentamer positive cells (p= 0.0058), suggesting that by disrupting the PD-1/PD-L1 axis we could decrease the amount of dysfunctional antigen specific T cells. We ob- served that the anatomical location deeply influenced the state of CD4+ and CD8+ T lymphocytes. In fact, TIM-3 expression was in- creased by 2 fold on TILs compared to splenic and lymphoid T cells. In the CD8+ compartment, the expression of PD-1 on the surface seemed to be restricted to the tumor micro-environment, while CD4 + T cells had a high expression of PD-1 also in lymphoid organs. Interestingly, we found that the levels of PD-1 were significantly higher on CD8+ T cells than on CD4+ T cells into the tumor micro- environment (p < 0.0001).
Conclusions
In conclusion, we demonstrated that the efficacy of immune check- point inhibitors might be strongly enhanced by their combination with cancer vaccines. PeptiCRAd was able to increase the number of antigen-specific T cells and PD-L1 blockade prevented their exhaus- tion, resulting in long-lasting immunological memory and increased median survival
Studierstube: a collaborative virtual environment for scientific visualization
Zsfassung in dt. Sprache14
- …